Drilling and Completion Fluids
The addition of a ‘state of the art’ Drilling & Completion Fluids core test rig has expanded the formation damage capabilities of the Core Analysis section at Scaled Solutions Ltd. This high specification test rig allows the Formation Damage potential of oil or water based Drilling & Completion fluids under full reservoir conditions, for 3-phases (oil / brine / gas) and at HTHP.
Coupled with our existing technology in conventional Formation Damage and Chemical Treatment core testing, Scaled Solutions Ltd can now provide a complete service from initial drilling through to “late life” field production.
The open annulus core holder design allows viscous drilling / completion fluids to be applied to the core plug face semi-dynamically at field overbalance pressures closely replicating well operations. Filtrate loss (leak-off) is accurately measured using a precision Quizix pump. The test rig set-up allows drawdown can be performed either at constant rate / incremental (under-balance) pressure or constant pressure / incremental rate.
Max. Temperature: ~200°C
Core holder: All wetted parts are Hastelloy
Accepts sand / gravel screen coupons
Core Size: 1.5” & 1” diameter. 14cm max. length
Flow Lines: All wetted parts are Alloy 600
Filtrate Loss / Production: Quizix Hastelloy QX-6000TM
Logging System: LabView Compact Field Point System
Fluid Phases: Brines, Dead Crude Oil, Drilling Fluids, Completion Fluids, Clean Up Fluids